- Baby Change Stations
- Bench Seats
- Coat Hook
- Commercial Door Hardware
- Grab Rails and Back Rests
- Hand Dryer / Waste Receptacle Combination
- Hand Dryers
- Paper Towel Dispensers
- Shower Accessories
- Shower Kits
- Shower Tracks / Curtains
- Soap Dish
- Toilet / Shower Partition Hardware
- Toilet Partition Kits
- Toilet Partitions
- Toilet Roll Holders
- Towel Bar
- Waste Management
GRAB RAIL – TOILET SLOPING ARM 90 DEGREES FROM HORIZONTAL 2 PIECE 965 X 600 MM + 300 MM JDM-GTP-9
Enter your postcode to check delivery availability
|5 - 200||5%||-|
➡️ Fabricated of grade 304 stainless steel
➡️ Concealed flanges
➡️ Two-piece set for exposed cisterns
➡️ The main piece bent 90-degree angle
➡️ 300mm straight grab rail included
➡️ Designed for the safety, security and convenience of the physically disabled.
➡️ Easy to install on most building surfaces.
➡️ Grab Rails shall be type 304 stainless steel alloy 18-8.
➡️ Tubing shall be 32mm diameter x 18 gauge (1.2mm).
➡️ Flange shall be 3mm thick and shall be Heliarc welded to tubing with a continuous concealed bead and shall have three (3) 7mm diameter mounting holes.
➡️ Cover plates to conceal flange and fixings shall be 22 gauge (0.8mm) stainless steel.
➡️ All exposed surfaces shall have a Satin finish.
➡️ To comply with Australian Standards, grab rails must be fastened a minimum distance of 800mm from the floor, with 600mm of clear space above the rail and to withstand a force of 1100N at any point from any direction.
➡️ 12 months from the date of purchase