- Baby Change Stations
- Bench Seats
- Coat Hook
- Commercial Door Hardware
- Grab Rails and Back Rests
- Hand Dryer / Waste Receptacle Combination
- Hand Dryers
- Paper Towel Dispensers
- Shower Accessories
- Shower Kits
- Shower Tracks / Curtains
- Soap Dish
- Toilet / Shower Partition Hardware
- Toilet Partition Kits
- Toilet Partitions
- Toilet Roll Holders
- Towel Bar
- Waste Management
GRAB RAIL – TOILET SLOPING ARM 40 DEGREES FROM HORIZONTAL WITH GERM SHIELD 1 PIECE 1110 X 950 X 700 MM JDM-GFS-1
Enter your postcode to check delivery availability
|5 - 200||5%||-|
➡️ Designed for the safety, security and convenience of the physically disabled with the added protection of the Germ Shield rubber seal.
➡️ Easy to install on most building surfaces. Grab Rails shall be type 304 stainless steel alloy 18-8.
➡️ Tubing shall be 32mm diameter x 18 gauge (1.2mm).
➡️ Flange shall be 5mm thick and shall be Heliarc welded to tubing with a continuous concealed bead and shall have three (3) 7mm diameter mounting holes.
➡️ Cover plates to conceal flange and fixings shall be 2.8mm stainless steel.
➡️Grab rails indicating handing are referenced from the in-situation position (eg the pan or shower) not looking at it.
➡️Handing is indicated by the suffix of either LH (Left Hand) or RH (Right Hand) and MUST be specified at the time of order.