- Baby Change Stations
- Bench Seats
- Coat Hook
- Commercial Door Hardware
- Grab Rails and Back Rests
- Hand Dryer / Waste Receptacle Combination
- Hand Dryers
- Paper Towel Dispensers
- Shower Accessories
- Shower Kits
- Shower Tracks / Curtains
- Soap Dish
- Toilet / Shower Partition Hardware
- Toilet Partition Kits
- Toilet Partitions
- Toilet Roll Holders
- Towel Bar
- Waste Management
GRAB RAIL – SHOWER EXTENDED COMBINATION HORIZONTAL & VERTICAL 1 PIECE 1000 X 760 X 1100 MM JDM-GEC-1
Please note that deliveries may be delayed up to 4 weeks for this product.
– Fabricated of grade 304 stainless steel
– Concealed flanges
– Designed for the safety, security and convenience of the physically disabled.
– Easy to install on most building surfaces.
– Grab Rails shall be type 304 stainless steel alloy 18-8.
– Tubing shall be 32mm diameter x 18 gauge (1.2mm).
– Flange shall be 3mm thick and shall be Heliarc welded to tubing with a continuous concealed bead and shall have three (3) 7mm diameter mounting holes.
– Cover plates to conceal flange and fixings shall be 22 gauge (0.8mm) stainless steel.
– All exposed surfaces shall have a Satin finish.
– To comply with Australian Standards, grab rails must be fastened a minimum distance of 800mm from the floor, with 600mm of clear space above the rail and to withstand a force of
1100N at any point from any direction.
12 months from the date of purchase
Enter your postcode to check delivery availability
|5 - 200||5%||-|