Product categories
- All
- Baby Change Stations
- Bench Seats
- Coat Hook
- Commercial Door Hardware
- Dispensers
- Grab Rails and Back Rests
- Hand Dryer / Waste Receptacle Combination
- Hand Dryers
- Mirrors
- Misc
- Paper Towel Dispensers
- Pinboards
- Shelf
- Shower Accessories
- Shower Kits
- Shower Tracks / Curtains
- Signage
- Soap Dish
- Table Tops
- Toilet / Shower Partition Hardware
- Toilet Partition Kits
- Toilet Partitions
- Toilet Roll Holders
- Towel Bar
- Waste Management
- Whiteboards
- ⭐Sale⭐🛒
Showing 1 − 12 of 17 results
100 Series Bumper – 101
Material: Brass, Rubber Insert
Please Specify Finish: 101 SCP: Satin Chrome / 101 BCP: Bright Chrome
Mounting: Screw Fix
Dimensions: 48 x 54 x 18 mm
100 Series Combined Bumper Staple – 115
Material: #304 Stainless Steel, Rubber Insert
Finish: Satin Stainless Steel
Mounting: Screw Fix
Note: Suits 33mm door
Dimensions: 50 x 72 x 13 mm
100 Series Edge Mounted Bumper – 116SS
Material: #304 Stainless Steel, Rubber Insert
Finish: Satin Stainless Steel
Mounting: Screw Fix
Dimensions: 50 x 33 x 15 mm
700 Series Stainless Steel Concealed Bumper 700C_BUMP_SS
Material | #304 Stainless Steel Rubber Insert |
Finish | Satin Stainless Steel (SSS) |
Specify | 700C_BUMP_SS |
Mounting | Screw Fix |
Dimensions | 52mm(W) x 47mm(L) x 17mm(D) |
Ainslie Door Bumper
Material | Diecast Zinc, Alloy ZP3 Rubber Insert, ABS Snap-On Cover |
Finish | Satin Stainless Steel/Black |
Mounting | Concealed Screw Fix |
ANMB_MODABUMP Antimicrobial Moda Bumper
Material | Diecast Zinc, Alloy ZP3 Rubber Insert ABS Snap On Cover |
Finish | ANMB_MODABUMPER: Antimicrobial Coating (Shown) MODA_BUMPMKII_SCP: Satin Chrome Plate MODA_BUMP_SPP: Satin Pearl Plate DESIGNER_MODABUMPER: Satin Matte Black |
Mounting | Concealed Screw Fix |
Dimensions | Length: 55mm x Width: 45mm x Depth: 7mm |
Refer to line drawings for more information. |
Bumper – 107
Material: Brass, Rubber Insert
Finish/Specify: 107 SCP: Satin Chrome / 107 BCP: Bright Chrome
Mounting: Bolt Through
Dimensions: 48 x 54 x 18 mm
Bumper – 107E
Material: Brass, Rubber Insert
Finish: Satin Chrome Plate (SCP)
Mounting: Bolt Through
Dimensions: 48 x 54 x 18 mm
Bumper – 600
Material: Die-cast Zinc, Alloy ZP3, Rubber Insert, ABS Snap On Cover
Finish: Satin Chrome
Mounting: Concealed Screw Fix / Surface Mounted
Dimensions: 48 x 61 x 18 mm
Note: Bumper sold/supplied separately as not included with 600 Series Indicator Set
Combined Bumper Staple – 114
Material: #304 Stainless Steel, Rubber Insert
Finish: Satin Stainless Steel
Mounting: Screw Fix
Note: Suits 18mm door
Dimensions: 50 x 62 x 13 mm
Concealed Fix Bumper – 101C
Material: Die-cast Zinc, Alloy ZP3, Rubber Insert, ABS Snap On Cover
Please Specify Finish: 101 C SCP: Satin Chrome
Please Specify Mounting: Concealed Screw Fix or Bolt Through
Dimensions: 48 x 55 x 18 mm
Note: For Bolt Through use FP 101 C Concealed Fix Face Plate